Inventory – Hawk 20 Dayboat
PRICE OF STANDARD BOAT: £25,250
PLUS VAT 20%: £5,050
TOTAL: £30,300 ex.works
THE FOLLOWING ITEMS ARE INCLUDED in the above price:
Hull
Hull – Standard white, with 2 stripes to your choice of colour. Deck – (including engine hatch and spinnaker chute), deck fittings, harness point. Buoyancy – closed cell buoyancy compartments and under floor. Lead Ballast – glassed into bilge, with limber channels. Cast alloy aerofoiled centreboard with 6 to 1 lifting tackle. Bilge pump & strum box etc. 2 self bailers. Housing conduit for fuel pipe to separate fuel tank in locker (excluding tank), 2 well closure plugs.
Mast
Selden – silver anodised. Tapered top section, backstay with facility for topping lift, spinnaker halyard, jib halyard, pole topping lift sheaves, pole launch retracting system (without pole), “T” terminal backplates for upper and lower shrouds, spreaders, pole eye, sail latch gate, gooseneck, exit sleeves for halyards, pivoting heel plug and mast step.
Boom
Selden – silver anodised. Outhaul, 2 sets slab reefs, 5 boom slides plus fittings for Spiro pole launching system (without pole).
Kicking Strap & Strut
Kicking strap combined with adjustable telescopic tubular aluminium kicking strut.
Rigging
Selden 4mm cap and lower shrouds and forestay with flexible wire halyard, 3mm backstay to bridle, 4mm 7 x 19 jib halyard with 8mm tail, main halyard. 8mm spinnaker halyard and 6mm pole topping lift (both the latter are included in case spinnaker is required later).
Sails
Mainsail with single line reefing system. Jib with furling gear. Mainsail cover.
Rudder
Stock – aluminium composite, black anodised. Tiller – aluminium, black anodised. Golf grip tiller extension. Rudder blade with 3 to 1 downhaul, 2 to 1 uphaul complete with blocks.
Hatches
2 engine bay well closure plugs. 1 bulkhead hatch.
Boarding Ladder
Stainless steel – fitted.
Deck Fittings
Jib blocks, jib cheek ratchet blocks, jib sheet cam cleats, jib track and cars, mooring cleats and fairleads, rubbing strake, mainsheet swivel base centre jammer with ratchet and boom blocks, backstay adjuster complete with cleat, stemhead fitting complete with roller, safety harness attachment ring, 2 halyard winches and 1 handle, swivelling jammer for centreplate, 2 halyard clutches, mast step blocks, maker’s brass nameplate complying with CE RCD.
Rope
Main sheet, jib sheet, centreplate operating line, backstay adjuster line, rope bags.
Wind Indicator
At masthead.
Compass
Plastimo Mini Contest.
Colours
Standard deck colour is light grey – this is a slightly off white to reduce glare. Standard hull is white. Other colours are available at moderate extra cost but may add to build time.
Complies with EC Recriational Craft Directive – Category C